-
-
CHOOSING A BEVEL-

CHOOSING A BEVEL

Today there are many more styles of bevels available. We still offer a standard Helmold
bevel of 60°, but our new 2 pt. shaved edge rule with a more acute angle of 53° or 42° (available in center face and center face long bevel style) requires less pressure when diecutting.

We offer the following styles:
-

  • CFB - Center Face Bevel
    which is located in the center of the rule thickness
  • CFLB - Center Face Long Bevel
    which is used to help minimize press pressure when cutting thick material
  • FB - Flush Bevel
  • MBB - Minimum Back Bevel
  • SFB - Side Face Bevel
    which is located close to one side
  • SFLB - Side Face Long Bevel
    also used to minimize press pressure when cutting thick material, this bevel creates a cleaner cut with less crush on the finished material.

CFBCFLBFBMBBSFBSFLB
Ground (GE)
Shaved (SE)
60°
53°
42°
Distance (d).002.004.007

 



CHOOSING A QUALITY-

CHOOSING A QUALITY

Helmold is committed to meeting or exceeding all IADD specifications. Every foot of rule is continuously laser-checked for the highest accuracy: during processing, and then again during packaging. Because our quality control process is so advanced, we are able to offer an “Ultra-Precise” grade shaved rule with a height tolerance of ± 0.0008".


PointThicknessFeet/BoxWeight/BoxFeet/Coil
1 pt.01450022.9 lb600
1 1/2 pt.02133522.9 lb400
2 pt.02825022.9 lb300
3 pt.04216522.9 lb200
4 pt.05612523.5 lb150
6 pt.0848523.5 lbN.A.

Quantity in feet (.937 Height)






CHOOSING A TEMPER-Click to enlarge.
Click to enlarge. zoom

CHOOSING A TEMPER

 
According to thickness and hardness there are different possibilities in achieving the required bending radius. For a complete overview see the data sheet with the possible angels and radius of all Helmold steel qualities.


BACK TO TOP